High quality synthetic rattan panel strip, double-sided and supplied in rolls measuring 19x204 cm, individually packaged. Thanks to its weight of 1200 g/m2, this synthetic rattan panel strip (or polyrattan) has characteristics of durability over time, is protected from UV rays and is resistant to atmospheric agents. Its measurements are specific to be inserted inside the rigid fence panels with traditional meshes no less than 20 cm high. Its length of 204 cm ensures coverage of the entire length for 200 cm long panels. This article lends itself well to creating privacy with plays of shapes and colors as desired on both sides of the fence. You can decide to lay it on all the links creating total coverage of the fence or only in a certain area or alternate a strip of rattan with an empty one by combining the colors you prefer. You can truly give space to your imagination. The pose is simple. Simply insert the strip inside the panels' links (for example one link inside and one outside) and secure them at the ends with plastic ties or tying wire, first drilling the ends of the strip itself with a tool such as a screwdriver. Although it was designed to be installed on panels with 50x200 mm mesh, it can also be used on balconies, railings or any other stable support. Why not also as a flowerbed border if supported by adequate pegs. We'll give you some advice... As always when installing screening on fences, first make sure it is sturdy enough to resist the wind!
